Paper Cup Stiffness Tester

Used to measure the surface covered with paraffin, polyethylene film and other substances for cold, hot drinks and ice cream paper cups, can also be used for paper cups and plastic cup body stiffness measurement.

Product features

Single chip microcomputer control technique, double measuring head drive and double head measuring (double probe sensor) are adopted to ensure uniform force.

Fully automated test, automatic reset, LCD Chinese display, test data memory and statistical processing function (printer print output of a single measurement, average, maximum and minimum).

Technical index

Range of measurement: (0~30) N

Resolution: 0.01N

Indication accuracy: ± 1%

Variation of indication: less than 1%

Two spherical radius of contact measuring head is 5mm

Test speed: (50 ± 2.5) mm/min

Relative movement distance of measuring head: (9.5 ± 0.5) mm

The measuring head of the neutral: less than 0.2mm

Two measuring head opening distance: (40~120) mm

Measure the height of the cup: (10~180) mm

Test description

The test samples were placed in the sample bench cup body stiffness measuring instrument, adjusting sample bench height, the side wall of the measuring head close to the sample, the side vertical distance measuring head and the bottom of the cup for cup high of 2/3, and the tested cup cup body toward the joint test, open the instrument. Determination of the cup body stiffness.

Note: each sample is measured in 5 paper cups with an average value of the result, accurate to 0.01N.

Applicable standard

GB/T27590-2011

QB/T2294

Device parameter

Chinese measurement and control LCD screen life: about 50 thousand hours

Power supply: AC220V + 22V 50Hz 0.5A should be reliably grounded

Overall dimensions (L * w * h): (500 * 270 * 330) mm

Net weight: 30kg