Cut Tobacco Filling Value Tester

The filling value measuring instrument for the detection of tobacco shred (including leaf silk, silk, silk and other leaf expansion sheet) and expanded stem filling ability, the performance indicators at the international advanced level, can replace similar imported products.

Product features

Using high-precision length sensor, the sensor resolution 0.001mm, far higher than the standard length accuracy requirements of + 0.01mm. When the instrument is out of factory, repetitive control of <0.02mm is superior to standard requirement of <0.03mm;

The precision ball screw drive is adopted to ensure the stability and durability of the instrument;

The measuring head pressurization, measuring speed and measuring time can be arbitrarily set in a certain range, thus improving the applicability of the instrument, and the function is of great significance to the scientific research and testing institutions. The same instrument can conveniently detect the filling and charging of cut tobacco and stem silk, so as to improve the detection efficiency;

LCD Chinese display interface operation. Automatic test, test data, statistical processing work and output of micro printer. The instrument is connected with electronic balance. The weight of sample is not limited to 10g, which reduces the influence of human factors on test results when weighing samples. Direct calculation shows the filling value, and the detection data is more scientific and easy to operate;

The instrument equipped with a calibration procedure with standard length gauge, measurement and calibration of users or departments (third party) can be easily carried out length error and repeatability of the calibration of the instrument.

Technical index

Length measurement range: (0~57) mm

Resolution: 0.001mm

Length measurement accuracy error: ± 0.01mm

Repeatability: ± 0.02mm

Measure pressure weight: 9.80N, 19.6N, 29.4N (Ren Xuan)

Measuring weight allowable error: ± 0.01N

Pressure measurement time: 30 s

Measuring pressure time allowed error: ±0.1s

Measure pressure time range: (1~99) s (adjustable)

Measurement of pressure down speed: (19 ± 0.1) mm/s

Barrel diameter: (60 ± 0.1) mm

Total capacity of material barrel: 0.3L

Experimental results: each measurement value, maximum value, minimum value, average value and standard deviation, coefficient of variation and other statistical data and print output.

Applicable standard

YC/T152
YC/T163

Device parameter

Chinese measurement and control LCD screen life: about 50 thousand hours

Power supply: AC220V + 22V 50Hz 0.5A should be reliably grounded

Overall dimensions (L * w * h): (330 * 340 * 540) mm

Net weight: 30Kg