Suction Speed Tester

Water absorption meter according to the "Klemm method" principle, mainly used for non - adhesive paper and cardboard (such as toilet paper) capillary suction height measurement. A vertical suspension of the sample, its lower end immersed in water, measured after a certain period of capillary imbibition height, absorbent time, according to the characteristics of products to choose, such as 10min ±10s, etc..

Product features

It adopts a table top structure, and the ruler can be freely lifted and lowered. The utility model is convenient and safe to use.

The main parts are made of corrosion-resistant materials such as stainless steel.

Technical index

Water gauge height measurement range: (0~200) mm

Specimen size: (250 * 15) mm

Ruler graduation value: 1mm

Simultaneous determination of sample number: 10 bars

Number of measuring rulers: 5

Test description

With the special uniform sampling equipment from samples cut from 5 wide (15 + 1) mm, the length of at least 250mm samples, the specimen beam clamped down gently holding paper, make the specimen vertically into the (23 + 1) distilled water or deionized water of 5mm DEG C, open the stopwatch and 10min + 10s after reading capillary suction height.

Note: if the wetting line is tilted or bent when the liquid rises, the result shall be read at an average height. If the absorption rate of the outer layer is not the same at the same time, the result shall be indicated on average.

Applicable standard

GB/T461.1

ISO8787

Device parameter

Overall dimensions (L * w * h): (430 * 230 * 370) mm

Net weight: 7kg