Inclined Impact Test Systems

The objects of potential energy into kinetic energy principle, the package according to predetermined position to the end of slide when the impact velocity and the impact plate with a velocity perpendicular to the direction of impact, in order to achieve the purpose of the scheduled test.

This machine is mainly used to simulate the packages and containers, inclined impact during transport and collision environment, commonly used test equipment as scientific research institutions, universities, packaging technology and testing center, packaging materials factory, foreign trade, transportation and other departments of the inclined impact.

Product features

Lifting device: hydraulic lifting device, more stable than pneumatic lifting, the load is much greater than the pneumatic device.

Steel track: steel track adopts 100*150mm (GB Q235) square to ensure that the bearing capacity and rail are straight and parallel to each other. The angle between the track plane and the horizontal plane is 10 degrees + 0.2 degrees. The surface of the track is smooth, and the scales are separated by the spacing of the 50mm along the slope. The track is equipped with a spacing device so that the trolley can stay at any position on the track.

Trolley: the trolley is equipped with a releasing device so that the trolley can be released freely at any position of the inclined plane. There is a certain friction between the test sample and the table surface, so that the test sample and the trolley do not move relative to the movement before the shock to the shock. However, when impacting, the test sample can move freely relative to the trolley.

Baffle: installed at the lowest end of the track, the angle between the impact surface and the track plane is 90 degrees, 1 degrees. The impact surface of the baffle is smooth, and the shock surface of the baffle has enough hardness and strength. When its surface is subjected to 160kg/cm2 load, the deformation is not greater than 0.25mm.

Technical index

Maximum sliding length: greater than or equal to 3000mm

The maximum load is not less than 500kg

Range of impact speed: (1 ~ 3.17) m/s

The impact of speed error: less than 5%

Block table size: (1500 * 1500) mm

Shock panel size: (2000 * 2000) mm

The test package is the maximum size (length * width * height): (1500 x 1500 x 2000 mm)

Control mode: hydraulic lifting, handle release

Test description

Trolley incline impact test machine is composed of a belt wheel and rail inclination of 10 degrees, according to the needs of the impact speed, set the trolley on the rail from the distance between the baffle plate, and then the test object is placed in the car, lock the car, rail will rise 10 degrees, so that the trolley running surface and perpendicular to the direction of open release trolley release device, trolley along the inclined 10 DEG orbit slide, impact on the baffle.

Note: when testing, attention should be paid to the contact surface between the test impact surface and the baffle plate, and the edge test can also be carried out.

Applicable standard

GB/T4857

GB/T 2423

ASTM D-775

ISTA 3A

Device parameter

Power supply: AC220V + 22V 50Hz 10A should be reliably grounded

Overall dimensions (L * w * h): (6300 * 2000 * 2100) mm

Net weight: 700Kg