Benging Tester

Labo Type 17071 Bending Tester is used to measure a materials resistance to bengding. This can be done in different ways. Either by measuing the force needed to bend a test piece to a predetermined angle or by measuring and determining the bending stiffness, which is an elastic property of the material. test seris can be selected as needed. More settings are available like bending angle,dweel time,angle speed etc.

The instrument can be used to test the crease force and bending stiffness.

Product features

The imported high-precision force sensor is adopted, and the accuracy is controlled at < 0.5%;

The bending length is adjustable from 1 to 50 mm, and the angle from 0 to 90 ° can be set at will, which makes the test faster and more accurate;

8-inch touch screen Chinese display, friendly man-machine interface operation;

Automatic clamping sample (photoelectric induction, pneumatic clamping), complete the test automatically;

It has the function of statistical processing of test data, print out test report, measure average value, maximum value, minimum value and each test value, which is convenient for technicians to quickly count data and prepare test report;

The calibration procedure is specially set inside the instrument, which is convenient for the metrology and calibration Department (the third party) to calibrate the instrument. During calibration, standard weights or force measuring devices can be used to calibrate the indication accuracy of the instrument.

Technical index

Measurement range: 2500mn, 5000mn, 10000mn optional

Accuracy 0.1mn

Test length: 1 ~ 50mm adjustable, accuracy 0.1mm

Test angle speed: 0.1 ~ 50? / s, adjustable, accuracy: 0.045? / S

Test angle: 0 ~ 90 ° adjustable, can measure three angle force and delay force at the same time

Test width: 38mm, accuracy: 0.01mm

Test description

Bending stiffness: evenly cut the sample from the sample with the sampling equipment, clamp one end of the sample in the sample clamp, bend 15 ° to one side (or other angles), record the force value, and measure 10 valid data on the front and back sides respectively.

Crease force: evenly cut the sample from the sample with special sampling equipment, clamp one end of the sample in the sample clamp, bend 90 ° to one side, stay for 15 seconds, and record the force value.

Applicable standards

Bending stiffness: GBT 23144-2008 iso2493 iso5628 TAPPI t556 din53121 scan P29

Indentation stiffness: bs6965, bs3748

Equipment parameters

Power supply: ac110-220 V ± 10% 50Hz, 0.5A should be reliably grounded

Gas source: ≥ 0.5MPa, provided by user

Overall dimension (L × w × h): (430 × 254 × 350) mm

Net weight: 15kg